Category: M400 Series

(Results from 11 to 20)
What are the pin outs for the M492 DE cable
·         See attached file: M490 de2 cable pdf...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Does the M490G maglock come with the L bracket?
Yes, The M490G has the TJ bracket in the box....
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
What is the decibel rating of the M490DE alarm and the Nuisance alarm
91dB at 2 ft. for both Nuisance and release alarm which is the same as the older 101+  delayed egress mag lock. ...
Schlage Commercial » System Components » Electromagnetic Locks » 101+ Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
What are the dimensions of M400 series Mag locks?
Click here to download the PDF     ...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Will the alarm output on a M490DE change state during 15 second release countdown or after M490DE releases?
The Alarm output contact should change state during the 15 second release. It will not change state until after the nuisance delay. ...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Does the M400 series mag locks have a UL294 listing ?
·         The M400 do not have UL294 listing- Power over Ethernet POE...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
What is the part number for the TJ bracket for the M490G?
P23688815    $241 List....
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
On the M490DEP, if they disable dip switch 6, door propped/forced, will that disable the sounder only, or will it disable notification to the ACP?
It won’t report to ACP if off and the alarm output for door forced and propped will also be disabled....
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
On a M492 with the HDB490, are the shims required to be installed for the HDB?
Yes, the shim places even pressure against the glass surface. Without the shim the screw is directly putting pressure on the glass.            &...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Do I have to install the shims that come with the M400 HDB bracket ?
·       Yes,  the HDB Kit will come with 2 shims, you may or may not need both, the shims allow you to make a tight fit and also allows for a cushion for the set sc...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series

Support by product