Category: Multi-Family

(Results from 1 to 10)
Schlage Control BE367 and FE410 - Split Finish
Yes, always list the exterior style and finish first followed by the interior style and finish....
Multi-Family
Can you use a StratIS table to update the firmware on the BE367 (SPED) locks?
No, you must use a HHD (Hand Held Device) to update the firmware on the BE367 (SPED) locks....
Electronic Locks » Hand Held Devices » Legacy » Schlage Electronics | Multi-Family
Schlage BE367 and Control BE467 - Dimensional Cross-Reference
BE367: 5.426" H 3.172" W 2.186" D    BE467: ADD: 5.25” H 3.00” W 2.09” D GRW: 5.26” H 3.01” W 2.05...
Multi-Family
Engage Locks - Firmware Version Not Showing Updated in Portal after Upgrade
 Sync the controller or lock via the mobile app to update the web portal with the new firmware version....
Electronic Locks » NDE Series | Multi-Family | Electronic Locks » LE Series | Electronic Locks » CTE
Are the control locks fire rated?
The BE467 and the FE410 have a 90 minute fire rating. ...
Electronic Locks » Offline » Multi-Family | Electronic Locks » Offline » Multi-Family » Schlage Electronics | Multi-Family
What is the warranty for the Control locks?
2 years from date of purchase and 1 year from date of install. ...
Multi-Family
Schlage Control FE410 - Interior Lever Retracting Deadbolt, but not Deadlatch
Check the handing plate on the exterior is seated properly. Incorrect installation of the handing plate can cause the spindle to not engage with the interior hub....
Multi-Family
Will the levers from CS210 lock work on the FE410?
On the FE410, they can use the levers from the CS210 locks. Part number: 06-242 specify design, specify finish.   Comes as a pair of levers (2) Use the same part number with the diff...
Electronic Locks » Offline » Multi-Family | Electronic Locks » Offline » Multi-Family » Schlage Electronics | Multi-Family
Schlage BE467 - Battery Pack Replacement Part Number
The part number for the Control BE467 battery holder and cable is: 47416191 This component should be available to order through authorized Schlage Electronic commercial dealers. ...
Multi-Family
Schlage FE410 - Passage or Deadlatch Issues in Retracting on Lever Press
Excessive wear on the latch caused by installation issues can create a condition where the lever will not be able to retract the deadlatch. If the door and frame are not aligned the deadlatch can...
Multi-Family

Support by product