Category: Power Supplies

(Results from 1 to 10)
Where is factory recommendation for location of an EPT?
EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin recom...
System Components » Power Supplies » EPT Series » Von Duprin
Locknetics LP150/250 Power Supplies - Wiring in Fire Alarm
Wire the Fire Alarm panel back to the “Control In” terminals on the Power Supply.  It needs to be a Normally-Closed dry contact from the Fire Alarm. ...
System Components » Power Supplies
Schlage Handkey II (HKII) Power Supply Information
The reader requires a 12-24VDC power source. The unit can use either a 12 or 24VDC signal from an external power supply, or a plug-in power supply: PS-110 for 110VAC facilities. PS-...
Biometrics » HandKey | System Components » Power Supplies
Is QELA compatible with the PS873 power supply?
QELA is compatible with the PS873.  ...
System Components » Power Supplies | System Components » Power Supplies » PS900 Series
Does the EPT power transfer faceplate sit flush in the frame and door?
Yes, the backbox is recessed, and the faceplate is flush....
System Components » Power Supplies » EPT Series | System Components » Power Supplies » EPT Series » Von Duprin
What is EPT10C?
EPT10C and the devices that go with it are "engineering special" products.  They are for San Francisco Airport only.  They have unique connectors.  They are not compatible with Allegion...
System Components » Power Supplies » EPT Series | System Components » Power Supplies » EPT Series » Von Duprin
What are the electrical ratings for the EPT power transfer?
The UL panic hardware file SA163 supports electrical ratings of: EPT2 24VDC, 5A 120VAC on NEC Class 3 circuit Non-fire rated applications EPT10 24VDC, 1A &n...
System Components » Power Supplies » EPT Series | System Components » Power Supplies » EPT Series » Von Duprin
Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?
Cutout depends on the size of 224 hinge.  See 112HD/224HD-EPT template.  112HD/224HD continuous hinge  Center line of EPT to top of the door  83 inches  30 inches  85 inches  32...
Mechanical Accessories » Hinges & Pivots » Ives | System Components » Power Supplies » EPT Series » Von Duprin
Are the mounting tabs for the EPT-2 and the EPT-10 available?
The mounting tabs are not available for the EPT2 or EPT10....
System Components » Power Supplies » EPT Series » Von Duprin
Does the wire size of an EPT affect the operation of an EL device?
Since most wire transfer devices such as an EPT or electric hinges cannot provide large gauge wires, we take the small gauge wire into account when determining the overall wire size for the device....
Exit Devices » Recessed » 2390 Series » Falcon | Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Exit Devices » Touch Bar » 1490 Series » Falcon | Exit Devices » Touch Bar » 1590 Series » Falcon | Exit Devices » Touch Bar » 1690 Series » Falcon | Exit Devices » Touch Bar » 1790 Series » Falcon | Exit Devices » Touch Bar » 24 Series » Falcon | Exit Devices » Touch Bar » 25 Series » Falcon | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | System Components » Power Supplies » EPT Series » Von Duprin