How do I program my device?
The programming processes for Allegion devices can be both
product and features specific.
Some products programming processes are electronic in nature, others are
physical in nature.
...
Automatic Operators | Biometrics | Credentials | Door Controls | Doors and Frames | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin
What is a Von Duprin 893P strike?
The 893P is not a strike, it is the UL label on a 6000 series strike. This label will not describe the strike you have....
System Components » Electric Strikes » 6000 Series » Von Duprin | Von Duprin
Warranty information on Allegion Commercial products.
For Warranty information, visit us.allegion.com/warranty or contact Customer Service at 877-671-7011.
...
Automatic Operators | Biometrics | Credentials | Door Controls | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin | | Dexter | Zero | Sealing Systems | Readers » IP Based
How is the QEL calibrated?
Calibration is an internal process of the QEL device when energized the 1st time. The solenoid will pull and drop 3 times on a standard calibration. Calibration can be forced by press...
Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Power Supplies » Standard » PS900 Series » Von Duprin | System Components » Electrified System Component Accessories » Rectifier » Von Duprin | Von Duprin
What electric strikes are available for Von Duprin rim exit devices?
The 22, 33/35A and 98/99 rim exit devices:
The 6111 is the most common electric strike to be used with these devices
6112 and 6113 electric strikes also could be used
The 6300 surface mount elect...
Exit Devices » Cross Bar » 55 Series » Von Duprin | Exit Devices » Cross Bar » 88 Series » Von Duprin | Exit Devices » Touch Bar » 22 Series » Von Duprin | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | System Components » Electric Strikes » 6000 Series » Von Duprin
What hinges can an EPT be installed with?
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2" b...
System Components » Power Supplies » EPT Series » Von Duprin
Where is factory recommendation for location of an EPT?
EPT installation guidelines are as follows:
Recommended location is 6" below top hinge per template
Steelcraft will locate the power transfer prep at the Von Duprin recom...
System Components » Power Supplies » EPT Series » Von Duprin
Where is the information on the Schlage ES-6400 and Von Duprin 6400 electric strike?
The Schlage ES-6400 Electric Strike has been rebranded to Von Duprin 6400 Series Electric Strike, making Allegion’s full electric strike portfolio Von Duprin branded. All product featur...
System Components | System Components » Electric Strikes | System Components » Electric Strikes » 6400 Series | System Components » Electric Strikes » 6400 Series » Von Duprin