What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?
The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm optio...
Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 450 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 81 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 90 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 70 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 79 Series » Glynn-Johnson | Door Controls » Surface Mounted » 4040 Series » LCN
How do I program my device?
The programming processes for Allegion devices can be both
product and features specific.
Some products programming processes are electronic in nature, others are
physical in nature.
...
Automatic Operators | Biometrics | Credentials | Door Controls | Doors and Frames | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin
Warranty information on Allegion Commercial products.
For Warranty information, visit us.allegion.com/warranty or contact Customer Service at 877-671-7011.
...
Automatic Operators | Biometrics | Credentials | Door Controls | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin | | Dexter | Zero | Sealing Systems | Readers » IP Based
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop....
Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Door Controls » Surface Mounted » 4040 Series » LCN
What special template (ST) is used with a 4110 closer and GJ90 series?
ST-2730 is used with a 4110 closer and GJ90 series (up to size 4). ST-2730 includes a special template and special arm with a -62G shoe and bent forearm.
If a drop plate is required, a 4010-18 ...
Mechanical Accessories » Holders and Stops » 90 Series » Glynn-Johnson | Door Controls » Surface Mounted » 4110 Series » LCN
What special template (ST) is used with a 2030 closer and GJ over head stop?
Special template ST-2211 is used to mount a 2030 series closer with a GJ 70,79,81,90, and 450 series overhead stops. This ST works with any GJ "surface" mounted stop.
The 2030 closer cannot be u...
Mechanical Accessories » Holders and Stops » 450 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 81 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 90 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 70 Series » Glynn-Johnson | Mechanical Accessories » Holders and Stops » 79 Series » Glynn-Johnson | Door Controls » Overhead Concealed » 2030 Series » LCN
What Ives hinge is labeled 27G5?
27G5 is not a model number.
It is the UL listing stamped into Ives Aluminum Geared Continuous Hinges.
To identify the model of the hinge, compare the shape and size of the door and fram...
Mechanical Accessories | Mechanical Accessories » Hinges & Pivots
What coordinator is model 33S1?
33S1 is not a model number.
33S1 is the UL Listing for Ives (and formerly Glynn-Johnson) Bar Coordinators (COR32, COR42, COR52, COR60, and COR72) and on the Gravity Coordinators (COR7...
Mechanical Accessories | Mechanical Accessories » Cabinet Knobs & Pulls » Ives | Mechanical Accessories » Flush Bolts and Coordinators