Category: Falcon MA series

(Results from 1 to 10)
What levers for the Falcon MA series has a return of 1/2"?
Return to door meets ½" requirement or less for the following levers: Dane, Quantum, Boardwalk and Longitude and Sutro levers....
Schlage Commercial » Falcon Commercial | Schlage Commercial » Falcon MA series
Can the Falcon MA311 mortise lock be ordered with an inside indicator?
The Falcon MA311 Indicator option is only for the outside....
Schlage Commercial » Falcon MA series
How is the rose installed on a Falcon MA mortise lock with Latitude (LAT) or Longitude (LON) trim?
Falcon MA mortise lock levers are typically designed so that the rose or escutcheon can be slipped on over the lever and spring cage and then secured in place.  However, the Latitude (LAT) and Lo...
Schlage Commercial » Falcon MA series
What size of allen wrench needed for installing the Longitude and Latitude levers for the Falcon MA series?
The size of allen wrench needed to install the levers is 3/32". ...
Schlage Commercial » Falcon MA series
Are solenoids or motors used in the Falcon MA series electrified mortise locks?
The Falcon MA series electrified mortise locks use solenoids. ...
Schlage Commercial » Falcon MA series
Does the Falcon MA series offer a universal Transformation guide?
Falcon does not have a universal transformation guide for the MA series.  You will need to look at purchasing the needed lock function....
Schlage Commercial » Falcon MA series
Can the Falcon MA series be ordered for a Non-standard door thickness?
The Falcon MA series can be ordered for a door thickness up to a 2 1/2" thick door, this would need to be specified at the time of ordering, and how the lock is centered within the thickness.Thumbturn...
Schlage Commercial » Falcon MA series
Is the Schlage L9453 Entrance office lock the same as the Falcon MA541 Entry/Office lock?
Despite having similar names these two locks are not interchangeable. The L9453 (ANSI F20) inside lever will retract the latch and deadbolt simultaneously, the MA541 (ANSI F21) will only retract ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Falcon MA series
Can the Falcon MA571 Dormitory/Exit lock be used in place of the Schlage L9473 Dormitory/Bedroom lock?
Despite both locks containing the word “Dormitory” they will function differently.The L9473 (ANSI F21) does not feature simultaneous retraction the inside lever will only operate the latch and the...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Falcon MA series
Can L series indicators work on an Falcon MA lockset?
The L series indicators will not work on the Falcon MA series. The L series lockset has a square hub for the indicator and the thumbturn. Where the Falcon MA has a diamond shaped hub for the indicator...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Falcon MA series

Support by product