Category: Door Position Switch

(Results from 1 to 5)
What would be equivalent to the 7803 mortise mount door position switch that is no longer offered?
The 7803 was a mechanical ball switch for door position. We do not make anything close to it any more. It was a concealed SPDT door switch so the 7764 or 679-05 could be a replacement for it but would...
Schlage Commercial » System Components | Schlage Commercial » System Components » Door Position Switch
On the 7764 DPS, how much of a distance does the DPS need to be apart, before it will note a break in contact?
1/2" distance is required before break in contact will be noted....
Schlage Commercial » System Components » Door Position Switch
What is the part number for the NDEB door position switch?
The part number for the NDEB door position switch is: L483-055 Door position sensor kit (includes sensor with wire harness and connector for NDEB only). ...
Schlage Commercial » System Components » Door Position Switch | Schlage Commercial » Electronic Locks » NDE Series
How does DPS switch work?
There are 2 parts to the Door Position Switches (DPS) Door side is reed switch and trim side has a magnet Reed switch detects when magnet is disconnected ...
Schlage Commercial » System Components » Door Position Switch | Schlage Commercial » System Components » Door Position Switch » 670 Series | Schlage Commercial » System Components » Door Position Switch » 670 Series » Schlage Electronics | Schlage Commercial » System Components » Door Position Switch » 7700 Series
How long is the 679-05 UL10C rated for?
Models 679-05, 679-05WD, 679-05HM Door Position Switches for use with listed fire exit hardware and single point locks and latches, are rated up to and including 3 hrs....
Schlage Commercial » System Components » Door Position Switch

Support by product