Category: EPT Series

(Results from 1 to 8)
What hinges can an EPT be installed with?
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2" b...
System Components » Power Supplies » EPT Series » Von Duprin
Where is factory recommendation for location of an EPT?
EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin recommended template locati...
System Components » Power Supplies » EPT Series » Von Duprin
Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?
Cutout depends on the size of 224 hinge.  See 112HD/224HD-EPT template.  112HD/224HD continuous hinge  Center line of EPT to top of the door  83 inches  30 inches  85 inches  32...
Mechanical Accessories » Hinges & Pivots » Ives | System Components » Power Supplies » EPT Series » Von Duprin
Are the mounting tabs for the EPT-2 and the EPT-10 available?
The mounting tabs are not available for the EPT2 or EPT10....
System Components » Power Supplies » EPT Series » Von Duprin
Does the wire size of an EPT affect the operation of an EL device?
Since most wire transfer devices such as an EPT or electric hinges cannot provide large gauge wires, we take the small gauge wire into account when determining the overall wire size for the device....
Exit Devices » Recessed » 2390 Series » Falcon | Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Exit Devices » Touch Bar » 1490 Series » Falcon | Exit Devices » Touch Bar » 1590 Series » Falcon | Exit Devices » Touch Bar » 1690 Series » Falcon | Exit Devices » Touch Bar » 1790 Series » Falcon | Exit Devices » Touch Bar » 24 Series » Falcon | Exit Devices » Touch Bar » 25 Series » Falcon | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | System Components » Power Supplies » EPT Series » Von Duprin
Can an EPT be used with Cam Lift Hinges?
An EPT can be used with a Cam Lift Hinge: Maximum hinge lift dimension = 1/2".  The EPT must be installed correctly with the tube at the top on the door side and the tube at bottom on th...
System Components » Power Supplies » EPT Series » Von Duprin
What is the difference between the EPT 2 and the EPT 10?:
The EPT2 has (2) 18 gauge wires and the EPT10 has (10) 24 gauge wires.  Even though they are 18 gauge or 24 gauge wires they are special high stress, high flex, & high current wires specifically u...
System Components » Power Supplies » EPT Series » Von Duprin
Can the Von Duprin EPT be used on a wood door?
The EPT-2 and the EPT-10 can be used on aluminum, hollow metal, and wood doors.  It is recommended that the door manufacturer be consulted as well for compliance in UL applications....
System Components » Power Supplies » EPT Series » Von Duprin