Can you convert an M490 to an M490P?
Not fully or officially. But you could swap out the armature for one with magnets and install the PCB assembly from the M490P. This would allow you to DSM but not MBS....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Can I paint my maglock because they only come in one color?
We do not recommend and advise against painting or altering the mag lock housings in any way. This will void warranty of the lock and could cause unforeseen circumstances/issues....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » Locknetics
Why do you need a full 2-3/4 inch header to mount our M400 mag lock series?
We usually state that the complete width of maglock housing and armature with holder is 2 3/4". The lock width is 1 3/4" and the armature with holder add another 1".That is why we call out 2 3/4" for ...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
On an M492P, does the DPS need power in order to change state?
The DPS does not need power to change state. The DPS is a reed switch that triggers off of the magnets in the armature housing. It can be tested with or without power to the main maglock board....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Is the M400 Mag Lock series "spark free"?
No, it is not certified as a spark free device for combustible/explosive applications....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series