Does the GF3000SM use the same armature as the GF3000?
Yes, you will need the TRD armature.
The bolts for the armature assembly are shorter for the TRD and that is what is needed for the Gf3000SM
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series
Using the M490DEP, does the door prop time reset with each card swipe?
Yes, the 20 second timer will restart, once the release contacts are reopened....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Can you wire a M490DEP for card reader on both sides of the door into RLS/RST?
Yes, you can wires in 2 readers, inside and outside reader in parallel to the M490DEP.
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Can the circuit board for the M400 series maglock be by-passed?
No, you cannot bypass the circuit board on the M400 series maglocks.
The circuit board has a voltage/surge protection built into the circuit board
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
How do you change a standard M490DE or M490DEP into an M490DE-2?
You would need these components to accomplish this:
P44487825 M490 DEL 2 CABLE ASSY
P44488377 490/450 DBK - Double Magnet Connector Kit (Screw Mounting Pack Sold Separate)
P44488443 M490...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Is the GF3000TJ armature the same as the standard GF3000 armature?
Yes, the GF3000TJ has a different mounting block, however the armature itself is the same as a standard GF3000.
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » Accessories » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
Where is the DPS located on the M490P?
It is located behind PCB board between the board and the access cover.
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Can the Schlage M400 Sex bolts be used on the Locknetics mag locks?
The sex bolts of M400 series and Locknetics magnetic locks are not interchangeable.They are a different size and thread measurement....
Schlage Commercial » System Components | Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series