At what temperatures will the 6000 series (6100,6200,6300,6400) electric strike operate?
The 6000 series electric strikes are UL1034 listed. As part of that testing, the strike is subject to a Variable Ambient Test which has the following standards:
A product other than the loc...
Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin
What is the part number for 6100 and 6200 solenoid pig tail connector?
The 6100 and 6200 solenoid pig tail connector is not a service part, however, the EL cable assembly 110388-00 can be used. ...
Schlage Commercial » System Components » Electric Strikes | Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin | Schlage Commercial » Von Duprin
Are electric strikes available in black finish?
Only 6100 and 6200 series strikes are available in black finish (matte or glossy). These are an engineering special with an additional cost....
Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin
What are the sizes of the 6210 electric strike pocket inserts?
9/16" for Von Duprin locks
1 3/4" for Schlage locks
1 1/2" for Yale, Best, Sargent locks
The complete insert package is #900584
...
Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin
Can electric strikes be used with vertical rod exit devices?
Electric latch retraction devices or electrified trim are better options than electric strikes when using vertical rod exit devices. Electric strikes often are not a good choice for use wi...
Schlage Commercial » Exit Devices | Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin
Why won’t my Von Duprin 6100 or 6200 series electric strike lock and unlock properly?
A regulated filtered DC power supply is best power choice.
If AC is being furnished, an SO rectifier kit is required between the power source and the strike. It will not work properly with ...
Schlage Commercial » System Components » Electric Strikes | Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin
What do the Von Duprin electric strike dual switches monitor?
DS (dual switch) is an option for the 6100 and 6200 series Von Duprin electric strikes. One switch monitors whether the strike lip (keeper) is locked or unlocked. The other switch monitors...
Schlage Commercial » System Components » Electric Strikes » 6000 Series
Why is there a transient voltage suppressor included with my electric strike?
ANSI BHMA 156.13 has a provision for inductive kickback. Using the transient suppressor across the strike's solenoid wires allows this standard to be met. This would be most applicable if ...
Schlage Commercial » System Components » Electric Strikes | Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin