Category: IP Based

(Results from 11 to 20)
Isonas Pure Access Cloud - Deleting Schlage RC11, RC15, RCK15 from a Tenant and Engage Site?
In order to properly delete a Schlage RC that is linked to Pure Access Cloud: 1) Deactivate the reader in Isonas Pure Access Cloud (PAC). 2) Delete the reader in PAC. 3) Use the Engage M...
Software » Isonas » Pure Access Cloud | Readers » IP Based
Schlage RC-15, RCK-15, and RC-11 - Factory Default Reset (FDR process)
Schlage RC reader-controllers require to be reset to Factory Default for reasons including Getting ready to recommission into Engage after being deleted from a site. As part of troubles...
Readers » IP Based » Readers
Pure Access Cloud and Schlage RC11, RC15, RCK15 - New Access Points Populating in Access Point List
Once a device has been linked into a Pure Access Cloud-created site in Engage, all devices setup there will eventually link into Pure Access' Access Point Page Schlage RC readers will only popul...
Software » Isonas » Pure Access Cloud | Readers » IP Based » Readers
Does the Schlage RC11/RC15/RCK15 ship with a short pigtail cable?
No, the Schlage RC11/RC15/RCK15 reader-controllers do not ship with a pigtail. Here are the part numbers to order: 47274562           &...
Readers | Software » Isonas | Readers » IP Based » Readers
Legacy ISONAS ASM and EDK on RC04 Readers
No. The data input wiring is different, and the legacy connectors are 5-pin rather than 4-pin for reader connection. ...
Readers » IP Based » Bridges and accessories (ASM/EDK)
Are HID IClass SE readers compatible with Isonas?
If the reader has a Wiegand output you can use it with the IPBridge controller, and it will work with Isonas....
Software » Isonas | Readers » IP Based » Bridges and accessories (ASM/EDK)
Trying to update the firmware in IPBridge, getting error: Update coprocessor 2 error.
Depending on the network, connection, sometimes it takes 3-5 tries before it updates. ...
Software » Isonas | Readers » IP Based » Bridges and accessories (ASM/EDK)
How to factory reset the Isonas Advanced Security Modules (ASM)?
To reset an Advanced Security Module (ASM) locate the reset pinhole on the same side of the ASM as the two LEDs (one LED is constant red showing 12vDc power and the other will flash green when the A...
Software » Isonas | Readers » IP Based » Bridges and accessories (ASM/EDK)
How to install the Isonas Advanced Security Module (ASM) with Fail Safe Locks?
When using an Isonas Advanced Security Module (ASM) for a Fail Safe lock and configuring the Access Point in Pure Access, you may need to set the ‘Fail Mode’ in Pure Access Cloud or the ‘Lock ...
Software » Isonas | Readers » IP Based » Bridges and accessories (ASM/EDK)
Can more than one RC04 control the same ASM?
No, there is a one to one pairing with the RC-04 and ASM device. ...
Software » Isonas | Software » Isonas » Pure Access Cloud | Readers » IP Based » Bridges and accessories (ASM/EDK)