Category: Keypad Readers

(Results from 1 to 6)
How do you factory reset (FDR) a KP79 Standalone keypad?
There is no FDR on the keypad. The programming memory is in the controller or lock the KP79 is connected to. You will need to reset the device the KP79 is wired to. ...
Readers » Keypad Readers | Readers » Keypad Readers » KP Series
Schlage KP2000 Keypad - Replacement Cross Reference
The DKP-165 from Locknetics would be the most similar looking keypad, single gang mount installation.  The DKP-NS would be recommended if using outdoors; this unit is narrow-style, similar ...
Readers » Keypad Readers | Readers » Keypad Readers » KP Series
General information on the Scramble Keypad SER3-W
Material composition? Lexan polycarbonate, Stainless steel and UV resistant Polyurethane. Reader Output? Wiegand 26, 34 & 40 bit protocal. Carrier Frequency? Digital to international Wie...
Readers » Keypad Readers » Scramble Key Pad | Readers » Keypad Readers » Scramble Key Pad » Schlage Electronics
What is the replacement for the Von Duprin 7321 keypad?
The VD 7308/7311/7321/7322 were replaced by the KP212 Von Duprin 7311 and 7321 key pads were discontinued and there are not direct replacements Von Duprin no longer sells key pads, contact Schl...
Readers » Keypad Readers » KP Series » Schlage Electronics | Von Duprin
Schlage KP2000e and KP2000em Model Numbers
The KP2000e is a medium duty single gang mount keypad that has plastic buttons that are illuminated. Not recommended for installations where the keypad will be abused or subject to a harsh environmen...
Readers » Keypad Readers » KP Series » Schlage Electronics
Toggle code on a KP 232 Keypad
Toggle codes will change the main relay state indefinitely.  To return to the initial state a toggle code must be entered again..   To program a Toggle Code into a ...
Readers » Keypad Readers » KP Series » Schlage Electronics