Category: Bridges and accessories (ASM/EDK)

(Results from 1 to 8)
Legacy ISONAS ASM and EDK on RC04 Readers
No. The data input wiring is different, and the legacy connectors are 5-pin rather than 4-pin for reader connection. ...
Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
Are HID IClass SE readers compatible with Isonas?
If the reader has a Wiegand output you can use it with the IPBridge controller, and it will work with Isonas....
Schlage Commercial » Software » Isonas | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
Trying to update the firmware in IPBridge, getting error: Update coprocessor 2 error.
The IP-Bridge 1.19/1.03 coprocessor firmware (1.03) can be difficult to install. If your IP-Bridge is already at coprocessor version 1.03 it is strongly recommended that you do not attempt to reinstal...
Schlage Commercial » Software » Isonas | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
How to factory reset the Isonas Advanced Security Modules (ASM)?
To reset an Advanced Security Module (ASM) locate the reset pinhole on the same side of the ASM as the two LEDs (one LED is constant red showing 12vDc power and the other will flash green when the A...
Schlage Commercial » Software » Isonas | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
How to install the Isonas Advanced Security Module (ASM) with Fail Safe Locks?
When using an Isonas Advanced Security Module (ASM) for a Fail Safe lock and configuring the Access Point in Pure Access, you may need to set the ‘Fail Mode’ in Pure Access Cloud or the ‘Lock ...
Schlage Commercial » Software » Isonas | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
Can more than one RC04 control the same ASM?
No, there is a one to one pairing with the RC-04 and ASM device. ...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
What is the part number for the cable to power the IP Bridge thru external power supply?
Here is the part number for the external power cable: IPB-Cbl-Pwr1-3ft - 3 foot power cable with “1” connector for connecting external power. ...
Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK) | Schlage Commercial » Software » Isonas » IPBridge
Is Schlage part number 47317537 Advanced Secure Module - Exterior Door Kit is the same as Isonas part number ACC-EDK-3A?
Yes, the ASM module has 2 different part numbers, but they are the same exact product....
Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)