Category: Isonas

(Results from 21 to 30)
How can I delete a user in Pure Access Cloud?
No you cannot completely delete a user in Pure Access Cloud (PAC) or Pure Access Manager (PAM). You can only deactivate a user. ...
Software » Isonas | Software » Isonas » Pure Access Manager | Software » Isonas » Pure Access Cloud
Does the RC03 reader need to be communicating to PAC for auto-unlock schedule to take effect?
It does not. Isonas RC-03, RC-04 and IP-BRv2 will execute existing Weekly Rules and Events in offline mode. Auto-Unlock schedules are normally Weekly Rules. The readers won't process Custom...
Software » Isonas | Software » Isonas » Pure Access Manager | Software » Isonas » Pure Access Cloud
Can you configure Schlage RC devices to output on TTL lines using Isonas?
Schlage RC TTL outputs are not used by Isonas ...
Readers | Software » Isonas
Why are Schlage devices commissioned by Engage for use with Isonas?
Yes, all Schlage NDE, LE  locks need to be commissioned on the Engage app first. Commissioning Engage or RC devices transfers Site Security Key ...
Electronic Locks » ENGAGE Application | Software » Isonas | Software » Isonas » Pure Access Cloud
What user role will Engage team members be in Isonas linked sites?
Linked Engage site users all will be a Manager role ...
Electronic Locks » ENGAGE Application | Software » Isonas | Software » Isonas » Pure Access Cloud
Will credentials synced from Active Directory work on NDE or LE?
Active Directory synced Credentials will not work on Engage locks ...
Electronic Locks » ENGAGE Application | Software » Isonas | Software » Isonas » Pure Access Cloud
What is the warranty on replacement hardware from Isonas?
If ISONAS replaces the Product, the replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. R...
Software » Isonas
What Ports does the Isonas Reader Configuration and Commander use?
UDP Port 30718 -> Device Discovery TCP Port 30718 -> Configuration / Get Device Settings TCP Port 10001 -> Firmware Update For IP-Bridge TCP Ports 10002, 10003 for doors 2/3 in ...
Software » Isonas
How to factory reset the Isonas Advanced Security Modules (ASM)?
To reset an Advanced Security Module (ASM) locate the reset pinhole on the same side of the ASM as the two LEDs (one LED is constant red showing 12vDc power and the other will flash green when the A...
Software » Isonas | Readers » IP Based » Bridges and accessories (ASM/EDK)
How to install the Isonas Advanced Security Module (ASM) with Fail Safe Locks?
When using an Isonas Advanced Security Module (ASM) for a Fail Safe lock and configuring the Access Point in Pure Access, you may need to set the ‘Fail Mode’ in Pure Access Cloud or the ‘Lock ...
Software » Isonas | Readers » IP Based » Bridges and accessories (ASM/EDK)