Category: Electromagnetic Locks

(Results from 11 to 20)
On the M400 series maglocks, to test the DPS, does it require the maglocks to be powered?
No, DPS should work and switch without power.             If they are actuating the DPS switch with the magnet and it is not changing, a p...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Which Schlage push bar should I order to be used with a Mag Lock?
·        The 672 Touch bar and the 692 Smart Bar can both  be used with a mag lock.   ·        The 672 – DPDT rate...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Push Button
Is the 390DEL the same template as the M490DEL
·         No- The template for the M490DEL armature and mag lock are different from the 390DEL....
Schlage Commercial » System Components » Electromagnetic Locks
Can you downgrade the M490P to a M490?
Yes you can order just the board but you can't upgrade a M490 to a M490P only the other way....
Schlage Commercial » System Components » Electromagnetic Locks
What replaced the 290 maglock?
The 290 was a surface mounted shear lock. So at this point, the replacement (not same size) would be the GF3000SM. GF3000SM is slightly bigger in size...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series
Do we have a z bracket for the M490G?
Yes it comes with the Mag lock....
Schlage Commercial » System Components » Electromagnetic Locks
What is the direct replacement for the Locknetics 301 maglock?
We do not have anything that will directly replace it in our current offering....
Schlage Commercial » System Components » Electromagnetic Locks
Can the 72 series maglock be used for in swinging door?
The 72 is not able to be used on in swinging door applications, it is not available as a TJ....
Schlage Commercial » System Components » Electromagnetic Locks
Explain Fail-Safe and Fail-Secure in terms of wiring with relays
When a lock is Fail-Safe it means that when power is dropped it will be unlocked.  During normal operation it requires power applied at all times and a Normally Closed (NC) and Common (C) connect...
Schlage Commercial » System Components » Electric Strikes | Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Horn | Schlage Commercial » System Components » Motion Sensor
What are the weight differences for the M400 series Mag Locks?
M420 - 6 lbs M450 - 10 lbs M490 - 14 lbs...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series

Support by product