Category: Electromagnetic Locks

(Results from 1 to 10)
Do the magnetic locks take AC voltage?
Do magnetic locks take AC voltage?No, maglocks only take 12 or 24 volts DC from a filtered and regulated power supply, generally at less than 1 amp @ 12vdc, and .5 amp @ 24vdc.(See the installation or...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » 101+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 101+ Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 280+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 280+ Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 320+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 320+ Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 320M | Schlage Commercial » System Components » Electromagnetic Locks » 320M » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 350+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 350+ Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 390+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 390+ Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 390DEL Series | Schlage Commercial » System Components » Electromagnetic Locks » 390DEL Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 40 Series | Schlage Commercial » System Components » Electromagnetic Locks » 40 Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 70 Series | Schlage Commercial » System Components » Electromagnetic Locks » 70 Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » M390RFK | Schlage Commercial » System Components » Electromagnetic Locks » M390RFK » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
What finish are the M400 series mag locks
M400 series mag locksare 628 finish: Satin aluminum...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
M490 DEP DIP switch off position
M490 DE & DEP - DIP Switches - Off is in the direction the arrow points or the DIP switch rocked  down toward the  board edge....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » 390DEL Series | Schlage Commercial » System Components » Electromagnetic Locks » 390DEL Series » Schlage Electronics
What is a maglock?
A maglock (electromagnetic lock or magnetic lock) is a locking device that consists of an electromagnet  coil and an armature plate.There are generally two main types of Mag locks the "...
Schlage Commercial » System Components » Electromagnetic Locks
M490DE or DEP Maglock will not bond. Wiring, installation, and settings seem to all be correct.
With power applied already, turn on dip switches 4-7.  Power down the lock then power it back up.  The lock should now bond.  Set the dip switches to the desired settings. ...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
What is the finish on TJ brackets / angle brackets for the 40/70 mag locks that is offered?
628 and 335 finish are available for 40/70 mag locks....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » 40 Series | Schlage Commercial » System Components » Electromagnetic Locks » 70 Series
Using a KP2000 with the M490DEP, how many wires will go from the KP2000 to the M490DEP?
Two wires, NO and C from the relay to trigger the input....
Schlage Commercial » Readers » Keypad Readers | Schlage Commercial » Readers » Keypad Readers » KP Series | Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
On a 400 series plus mag lock , are the ATS switch and MBS LED shipped with the lock as separate parts?
They are Separate parts....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Does an M400 series Mag lock need a diode added to the circuit for voltage spike suppression?
No, voltage spike suppression is built into the circuit boards on all M400 series Mag locks....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Can the GF3000 be installed on wood door and wood frame?
It can be installed on Wood Frame, but Wood Door is not recommended....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series