Category: SM 10

(Results from 1 to 3)
What does "LNL" mean on an Schlage reader part number?
The prefix "LNL" before an aptiQ reader part number represents the purchaser is Lenel.  This prefix also indicates that the aptiQ reader will have a "LENEL" brand label on the front cover instead...
Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics | Schlage Commercial » Readers » Proximity » PR 10 | Schlage Commercial » Readers » Smart Card » SM 10
Schlage SM10 - Not Compatible with OSDP 485 Configuration
The SM10 readers are do not support being ordered as -485 configuration.  The unit supports wiegand output only. If -485 OSDP is needed, recommend using MT11 or MT15 instead, or as of late 202...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Smart Card » SM 10
Schlage SM10 - Firmware Compared to MT-series
The firmware on the SM10 is the same as the MT-series readers, except only the X14 firmware package is loaded....
Schlage Commercial » Readers » Smart Card » SM 10

Support by product