What’s the difference between OSDP and OSDP Secure?
The readers:
MT15-485 and MT11-485
MTB15 (when using the 485)
Support OSDP secure (encrypted) or open. This is controlled by the Access Control system.
...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Do you need a config card for the MTB readers to communicate OSDP?
No... MTB Readers are able to communicate RS485 / OSDP by default.
However, you will need a configuration card if you want to change the OSDP address.
...
Schlage Commercial » Readers | Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries
How can I tell if my MT reader has passed or failed the power cycle sequence?
On power up, if the reader responds with multiple beeps then goes to a solid red LED, this indicates the smart circuit portion of the reader failed and needs to be replaced.
Otherwise a good rea...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
How do I change the track on an MTMS15 magstripe reader?
Power cycle the reader, wait for the beep then present configuration card to the reader within 60 seconds (see chart below for config cards).
...
Schlage Commercial » Credentials » Magnetic Stripe | Schlage Commercial » Readers » Magnetic Stripe Readers | Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
How can I commission a MTB to an Engage site when not listed.
You cannot commission an MTB reader to a standalone Engage account.
You will not see the option to select an MTB reader.
The MTB needs to be commissioned to a Partner (PAC) site.
...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Can the RSO update MTB readers (firmware) with a profiler, like they would on an MT reader?
Profilers do not work on MTB readers, MTB reader firmware is updated through Engage, so you would need to commission the reader to a partner site then connect and update firmware. MTB reader firmwar...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
What is the part number for the MTB reader cover single gang in black?
Single gang cover in black Schlage Bluetooth Logo: 47317564
Mullion cover in black Schlage Bluetooth Logo: 47317558
...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
How do you use a configuration flash card on a MT Series reader?
It's the same for all devices:
Power cycle the device.
Present the config card within 1 minute of boot up.
All the config cards say a triple beep indicates success, but in practice any r...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Can I factory default reset an MTB reader?
You will need to order the configuration card for the MTB. It does not come with the reader.The Configuration card number is: CE-000-012 (the card is not restricted)Please be sure to delet...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics