Can I use zero at the start of pin
No through software however
But AD/CO will allow the programming of a 0 manually at the
beginning of a pin....
Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 220 Series
What jigs are available for the AD and Co locks ?
See attached...
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series
CO200 or 250 MSD has no inside LED flash to indicate deadbolt was turned.
Remove the top cover and make sure the tamper is being pushed in
by the rubber stopper. The indicator will not work unless the tamper is
engaged. Test by holding the tamper switch with your fing...
Schlage Commercial » Electronic Locks » Offline » CO 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 250 Series
Is there a keypad membrane such as part #44487247 for a CO-Series lock for the AD-Series with a KP module?
No. Since the keypad module
on an AD-Series lock cannot be disassembled, the membrane cannot be replaced....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 100 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series
Can AD200 or CO200 locks be programmed with a two man rule?
No they cannot. There would
need to be two separate users with their own credentials to gain access.
In standalone mode or with Schlage Express Software this is not possible
to program....
Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series
Where do I find the instructions for the steel lever conversion ?
· See attached
instructions for converting the lock to steel levers...
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 100 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series
What is UL294 or UL1034?
UL 294 is a standard for Safety Access Control System Units. UL 294 applies to electrified hardware that control access but restricts free egress. UL 294 does not apply to electrified hardw...
Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » Offline » CO 100 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 250 Series | Schlage Commercial » System Components | Schlage Commercial » Electronic Locks » Offline » CO 220 Series | Schlage Commercial » Electronic Locks » NDE Series