Category: AD 250 Series

(Results from 51 to 60)
Schlage AD-Series - Replacement Inside Push Button (IPB)
The white-colored pushbutton on the main board is replaceable by ordering: 47269170   This component can be ordered through an authorized Schlage Electronics distributor. ...
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series
What is the part number for the AD series lock mortise mount?
The part number for the AD Mortise Mount is: 47284859 Backset    Bore    Faceplate Width    Total Height    Width at Base 2-3/4    ...
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series » Schlage Electronics
What are the conventional cylinder part numbers for the Schlage AD lock?
The Schlage electronic AD and CO locks take the same key-in-lever (KIL) cylinders.  The part numbers differ based on chassis style and lever design.   For locks with cylindrica...
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » Offline » CO 100 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 250 Series | Schlage Commercial » Key Systems » Cylinders
Can the AD and CO series locks be ordered with a custom matched finish?
The AD and CO series locks are only available in factory standard finishes and cannot be ordered with a custom matched finish. A split finish is allowed where the inside and outside of the lock is a d...
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » Offline » CO 100 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 250 Series | Schlage Commercial
Is there an overlay cover available for swapping an AD series lock with an NDE?
There is no cover available through Allegion. The customer can use a door wrap or get a cover custom made by a third party to mask the holes left by the AD lock....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » NDE Series
Can the Von Duprin 98/99 EO be used with the AD 993 series?
The 98/99 EO exit device comes with the NL drive screw installed and can be used with the AD 993 series....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Do the AD Series locks have a Latch Bolt Monitor switch?
There is no Latch bolt monitor LX switch available for any of the AD Series locks....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series
Does the AD series offer an option for a 2 3/8th Spring Latch?
There is not an option for a 2 3/8" Spring Latch for the AD Series locks....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series
Does an AD250 work with Schlage Express?
No, this lock is designed to work with Vanderbilt or CBORD, access control systems. ...
Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Software » Schlage Express
Can an AD993DT lock be converted to an AD993R lock?
No, the AD993DT dummy trim is just a hollow shell, there are no mechanical parts inside....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series