Category: Networked

(Results from 81 to 90)
Why would a pin number that starts with 7, 8, or 9 not work with an AD400 with a keypad?
This would be on the access control system side, they may be using 26 bit Wiegand emulation for the codes.  26 bit Wiegand emulation sends the PIN to the ACP as a 26 bit card. The BID range for 2...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series
What is the silver foil piece that comes with the AD400 Com board?
It is a foil reflective piece used to reflect the RF Signal away from the lockset. It is not optional it must be installed with the com board.Gasket foil part number is 46928974...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial
Does the AD300-993 dummy trim does require a core?
The AD300-993 dummy trim does require a core, it is used to keep the lever from being removed....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial
Can you install a PIM400-485 and have both an AD300 and AD400 connected to same PIM? If so, would you still need to address locks as 0 and 1?
Yes, both the AD300 and AD400 can be installed on the same bus. The PIM and the lock have to have different addresses to make sure there is no overlap. For example, the PIM is address at 0, they have ...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial
Can AD400’s work with OSDP?
AD locks use RSI which is a variant of RS485 comms, it's not OSDP; AD400s only support RS485, they do not support OSDP....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial
For the AD series lock, can you use more than one bit format for degraded cache mode?
Yes, when setting up degraded cache mode, enter the highest bit format you will be using. All lower bit formats will still be read into the degraded cache. ...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series
Video: Coupling a PIM to Android
Video: Coupling a PIM to AndroidSchlage SUS-A - Coupling to a PIM400-TD2 or PIM400-485 (youtube.com)...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series
Video: Coupling an AD Series lock to the Android
Video: Coupling an AD Series lock to the AndroidSchlage AD Series - Coupling with Android Device and SUS-A - YouTube...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series
Video: How to FDR a PIM400
Video: How to FDR a PIM400Schlage PIM-400 (-485 and -TD2) - Factory Default Reset Process (youtube.com)...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial
Can AD400’s use both the LX and RX switch functions?
RX or RTX is reported on AD 300 and AD 400. There is no latch bolt monitor (LX) on AD locks. The only monitor is the deadbolt monitor for mortise deadbolt on AD locks....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial

Support by product