Category: Networked

(Results from 61 to 70)
CTE cache mode UI
There is no Cache mode on CTE when using the Engage platform.When using Engage Managed account, CTE LINKS with IP Gateway only, and IP mode makes the decision at the door. IP mode has no cache mode or...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » Gateway
What inputs are available for the CTE?
Here is a list of the available inputs on the  CTE: Request to Enter Request to Exit Door Position Remote Release Tamper. ...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » ENGAGE Application
The AD200-993R appears to be compatible with the Sargent 8804 exit device. Why doesn't the AD400-993R? What is the difference?
The AD300 and AD400 993 need a low current RX switch that we provide in our Von Duprin and Falcon devices.               Since, we hav...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Offline
When AD300 is connected to the PIB300, will the privacy function work?
When AD300 is connected to the PIB300, will the privacy function work? No, when the AD300 is going through the PIB300, the privacy function will NOT work....
Schlage Commercial » Electronic Locks » Networked
On the PIB-300, is the REX contact, NO or NC?
It's field selectable.  Also, without the RLBD, it's a TTL output that holds 5V against ground, then when it changes state it sinks to ground.  If they need a dry contact, they need the RL...
Schlage Commercial » Electronic Locks » Networked
Where can I find the Firmware needed to ReClass an AD300 to an AD400?
The AD series Firmware package is located on the us.allegion.com site.Click on the search icon, type in AD.A.xxx (latest firmware version number), it will show up on the list. The package includes th...
Schlage Commercial » Electronic Locks » Networked
Which diode can they use with the Isonas RC-04?
Isonas and Schlage Reader-Controller include a BackEMF diode that is often appropriate for an electric strike in a low voltage DC application. If the included BackEMF diode is no longer available an i...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Software » Isonas » RC-04
CO-series and AD-series 993R Exit Trim and FRP (Fiberglass Reinforced Plastic) Doors
No, the Schlage AD-series and CO-series 993R CVC or CVR will only work on hollow metal doors, not FRP or wood doors. ...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline | Schlage Commercial » Electronic Locks » Offline » AD 200 Series
AD300 wired to PIB300, if you short out strike input and ground, should the AD300 unlock?
Yes, the AD300 should unlock if the wiring between the PIB300 and AD300 is correct and they are communicating....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series
Will the WPR400 SI reader read Corporate 1000 35 bit smart card?
It will read Corp 1000 iClass. If it's MiFare, it will not read the Corporate 1000 side of the card. We cannot read HID MiFare secure sector. ...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 400 Series

Support by product