Category: Networked

(Results from 51 to 60)
What is the weight of the 8B battery holder?
Approximately .05 lbs....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Offline
Are you able to daisy chain the Pim-400-485?
Yes, but also have to set the RS-485 address on the PIM's so as to make sure the Hi/Lo settings are not overlapping. ...
Schlage Commercial » Electronic Locks » Networked
Can a REPT400 work with either a PIM400-TD2 and a PIM400-485?
Yes.  The repeater kit includes a TD2 and WRI to repeat the signal....
Schlage Commercial » Electronic Locks » Networked
What is the part number to change a standard Schlage 6-pin kil cylinder (PD) in an AD-series lock to a Falcon G keyway?
Q500-058 Specify finish and G Keyway Keyed differently unless otherwise specified....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Offline
What is 410 operation?
After commissioning the operation of ENGAGE commercial locks is described as 200, 210, or 410 operation. This nomenclature indicates if the device is operating in various standalone or on-line st...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Offline | Schlage Commercial » Electronic Locks » Standalone/Offline | Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series
Can you use AD or CO locks on lead line doors?
Locks used for lead lined doors need to have a lead lining option in the lock which we do not offer for AD and CO locks. AD and CO locks can't be used on lead lined doors....
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Offline
On the AD-400-MS, the template for wood door shows 3/4" diameter hole, 1-1/2" deep for the DPS. Is it the same for the frame?
Yes, the switch and the magnet share about the same depth....
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series
When ordering the PIM400-TD2 and the optional relay board, does the relay board get installed before its shipped?
No, they are shipped separately....
Schlage Commercial » Electronic Locks » Networked
What is UL294 or UL1034?
UL 1034 is a standard for Safety Burglary-Resistant Electric Locking Mechanism. These types of locking mechanisms rely on an input signal or voltage from another device to lock or unlock the me...
Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Networked » AD 300 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Electronic Locks » Offline » CO 100 Series | Schlage Commercial » Electronic Locks » Offline » CO 200 Series | Schlage Commercial » Electronic Locks » Offline » CO 250 Series | Schlage Commercial » System Components | Schlage Commercial » Electronic Locks » Offline » CO 220 Series | Schlage Commercial » Electronic Locks » NDE Series
Can I change the function of my AD series lock in the field?
For an AD-200 you can change the function using the HHD under Device options -> Lock Properties -> Edit. AD-300 and AD-400 locks cannot be changed with the HHD but would be done by the access ...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » Offline