Category: System Components

(Results from 81 to 90)
Are the PIM 400-485 and WRI 400 weatherized and waterproof for a full outdoor install?
Use a NEMA 4X certified cable gland on the WRI where wires enter/exit. The PIM must be mounted indoors, no exceptions....
Schlage Commercial » Electronic Locks | Schlage Commercial » System Components
Can the Schlage M400 Sex bolts be used on the Locknetics mag locks?
The sex bolts of M400 series and Locknetics magnetic locks are not interchangeable.They are a different size and thread measurement....
Schlage Commercial » System Components | Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Can you adjust the plunger switch on the M490DE to make it more precise?
You cannot adjust the plunger switch on the mag lock coil, it is factory set. With a proper installationthe lock will operate as expected....
Schlage Commercial » System Components | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
On a MG1200DT is the Door status sensor SPDT switch used to determine if door is open or closed like a DPS or MBS?
It works like a DPS, it is the same as a Door Position Switch....
Schlage Commercial » System Components | Schlage Commercial » System Components » Electromagnetic Locks
What material is the 788 Door Cord made of?
The 788 Door Cord is made from stainless steel....
Schlage Commercial » System Components | Schlage Commercial » System Components » Door Cords
What is the difference in sound between the DE alarm and the door propped alert on the M490DE?
The sound is the same for both. During a DE alarm the LED will flash red. During a door propped alert, the LED will flash green. ...
Schlage Commercial » System Components | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series
Video: Manually pushing a door file into a CT5000
Video: Schlage SUS-A - Manually Pushing a Door File to CT5000 - YouTube...
Schlage Commercial » System Components | Schlage Commercial » System Components » Electrified System Component Accessories | Schlage Commercial » System Components » System Accessories | Schlage Commercial » System Components » CT5000
Video: Factory Default Resetting a CT5000/WRI400
Video: Schlage CT5000 and WRI400 - Factory Default Reset - YouTube...
Schlage Commercial » System Components | Schlage Commercial » System Components » Electrified System Component Accessories | Schlage Commercial » System Components » System Accessories | Schlage Commercial » System Components » CT5000
How much wire do I get with a 674-OH Door position switch?
There is 3 foot of armor cord then another 14 inches of wire for the 674-OH overhead door floor mount switch....
Schlage Commercial » System Components | Schlage Commercial » System Components » System Accessories
On a 7766 DPS, what is the required clearance for installation?
The recommended gap is 1/8th inch....
Schlage Commercial » System Components | Schlage Commercial » System Components » Door Position Switch | Schlage Commercial » System Components » System Accessories

Support by product