How do you use a configuration flash card on a MT Series reader?
It's the same for all devices:
Power cycle the device.
Present the config card within 1 minute of boot up.
All the config cards say a triple beep indicates success, but in practice any r...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Can I factory default reset an MTB reader?
You will need to order the configuration card for the MTB. It does not come with the reader.The Configuration card number is: CE-000-012 (the card is not restricted)Please be sure to delet...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
What formats can the MT readers read?
...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Does the MT15 support Indala format credentials?
No, Indala is a proprietary technology that none of our readers can read.
...
Schlage Commercial » Readers | Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
What is the size of the MTB15/MTBK15 cover screw?
Here are the sizes and part numbers for the screws:6/32 x 1/4" Pan Head Phillips or Torx Security HeadPart # for the Phillips: 23933492 Part # for the Torx: 23913296...
Schlage Commercial » Readers » Multi-Technology
What is the process for setting MT reader to secure OSDP?
This is handled by the access control system. OSD SECURE is set when the panel initially communicates with the reader, it sets all of the parameters (address, baud rate) and of course, a security key ...
Schlage Commercial » Readers » Multi-Technology
What card readers work with the CTE?
Because of the secure features, CTE only operates with a Schlage MT11-485 or MT15-485 wall reader.The CTE is only sold as a KIT which includes the choice of MT11-485, narrow mullion, or MT15-485, squa...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Schlage Electronics | Schlage Commercial » Electronic Locks » CTE