Category: 8310 Series

(Results from 41 to 50)
Can you mount the LCN 6” round actuator in a single or double gang box electrical box?
The 6” round 8310 actuator has two different mounting hole locations, with different sized screws for mounting to both single and double gang electrical boxes from others....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Is the electric strike on the LCN Restroom kit fail safe or fail secure?
The strike included with the LCN Bathroom Kit – 8310-2410 or 8310-2420 – can be set as fail safe or fail secure before installation.The Strike is Set as fail safe when shipped...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What locks can be used with the LCN Restroom Kit?
The electric strike included with the LCN Restroom kit can only be used with cylindrical locks.  This electric strike CANNOT be used with mortise locks, deadbolts, or rim exits devices. Reco...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Is the 8310-877S Header Mount Safety Sensor Spacer required when installing an 8310-877 Header Mount Safety Sensor?
The HMSS Spacer is a 3” standoff that allows the HMSS to be slightly distanced from the face of the closed door. This helps to prevent ghosting caused by slight door movement while closed, and also ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Can the 8310-806 3 position switch be used on the Falcon operator?
Yes, the key switches 8310-806K or R from LCN will work on the Falcon operators. Wire the red to main act, black to main act com and green to safety sensor....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » 8200 Series » Falcon | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What are the dimensions of the power supply cabinet used with the LCN Restroom Kit?
The power supply cabinet included with the LCN Restroom kit has the following dimensions:  11-1/16” height x 7-7/8” width x 2-11/16” depth...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What is the overall length of the LCN 8310-804 door mounted safety sensors?
The DMSS are shipped at an overall length with the end caps of 34.5” long....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What is the size of the blue and white automatic door decal -155-2?
This Blue and White activation label is Part # 155-2 and is only available in English.  This label is not part of the Operator Label kits, it is shipped with most of our push button actuator...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What is the length of cable that comes with the 8310-806K or 8310-806R?
The 8310-806K and 8310-806R comes with 6’ (6 feet) of cable....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What material is the 8310-819SJ mount box made of?
The 8310-819SJ surface mount box is plastic....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series

Support by product