Can you order an 8310-866 bollard with special prep.?
The 8310-866 bollard comes prepped for 1- 4-3/4 square actuator. We do not offer a blank bollard, or a special prepped bollard post. (ex - for two activation devices, card reader, etc..)....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Can you use an LCN weather ring with an LCN escutcheon?
The LCN weather rings will fit (8310-800 in the 8310-874/ 8310-801 in the 8310-876) but the installer would need to drill holes in the weather ring to allow it to slide over the pegs that the push pla...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Can you use the 8310-877 with a 7900 pneumatic control box?
You can use the 8310-877 with a 7900 pneumatic control box but you will need the 8310-3889 safety module for it to work....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Pneumatics » 2610 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4810 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4820 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4840 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 7900 Series
How far away can the SOLA be from an operator?
It is recommended that the power supply is installed as close as possible to the equipment being protected. The question on how far it can be mounted depends on the voltage drop of the wiring used and...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What is the cutout for the 8310-867F Flush mount box?
When using the 8310-867F Flush mount box you will need a cutout of 5-3/8 square x 2” deep for the box to recess in the wall....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Can you use the 8310-806K(R) three position switch with the 6440XP?
The 8310-806K and 8310-806R switches will not work with the 6400 Compact Operator. This unit does not have an indefinite hold open feature, nor will it hold open indefinitely if you send a const...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP | Schlage Commercial » Automatic Operators » Electrohydraulic » 6400
Are individual parts available for the LCN Restroom Kits?
The LCN Restroom kits are only available as a complete kit. There are no individual part numbers for the items in these kits. 8310-2410 for Touchless Actuator Restroom Kit ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series