What is the part number for the L9000 product thumbturn cylinder?
See table below for part numbers.
Table 1: 09-900 part number variations
...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How does the L9071 operate?
L9071 LV9071 (ANSI F32) Classroom Security Lock
Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
What is the L9080 by L283-263?
L283-263 and L283-239 are obsolete part numbers that were used to specify "request to exit" on the L9000 and LV9000 locks. To specify RX on L9000 locks after January 2, 2017, specify the letters ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Schlage
What parts are modified on Schlage mortise locks for thicker doors?
If attempting in-field modification of L9000 for a thicker door, here are the parts that may need to be modified:
Mounting posts (ferrules)
Spindles
Cylinders
...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What cams do we use on the L9060?
The straight cam should be installed on the outside cylinder and the clover cam on the inside.For Schlage Conventional mortise housings use the Following cam part numbers:Straight Cam
L583-476 – Fo...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the part number for the L series handing screw?
Screw part number is L583-485.
Screw type: 8-32 UC-2A W/#6 Flat truss head Phillips recess, header point....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How do you convert a L9080 to a L9070?
If swapping out complete lock case is not an option and you would like to convert components in the lock case this would void the warranty. See here for required parts....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Schlage
What are the part numbers for the mounting posts and screws for an L9000 lock?
Mounting Posts
Part Number
Door Thickness
L583-211
1 3/8"
L583-212
1 3/4" - See note section on SL1 trim
L583-213
2"
...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage