Category: Schlage

(Results from 1 to 10)
What is the wire gauge on the motor driven L9000 mortise locks?
Supply wires - 24AWGRX wires - 20AWGLX wires - 20 AWG...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How does an L9076 or L9077 holdback operate?
The holdback feature is applied as follows:     With the L9076 or L9077 in the locked position, the inside lever or knob is rotated until the latchbolt is fully retrac...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the size of the L9000 spindle?
All spindles are on a "square" at 0.312" (5/16")...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How to install an L9000 mortise lock less outside rose trim?
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000.  For installation and door prep requirements, see the install sheet.  Additi...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the universal L9000 lock case?
See Universal Transformation instruction guide here. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Is there a parts diagram that shows how to install an L0170 or L0172?
See install sheet P515-165...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
How do I change the hand on the 09-900 cylinder turn?
Also applies to the 09-487 (Replaced the 09-900  XL12-196 mortise cylinder coin turn)...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Is a mortise cylinder coin turn offered?
Coin turn will need to be on a separate line item, specify 09-487 x length (118, 114, 138).This cylinder coin turn is non-handed so it can rotate freely in both directions....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is an MEA number?
These are the BSA and MEA numbers for our locks. 456-06-E: Schlage L-Lock, Electrically Controlled Single-point Locks or Latches, LV9080EL 680-85-SA: Schlage L-Lock, Electrically Controlled Sing...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Where can I locate a CSFM listings for Allegion products?
CSFM (California State Fire Marshall) listings are available by clicking here.   In the category field select - Electric Locks Search in the Company field to find the items listed b...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage