Category: LMV9300 Series

(Results from 1 to 10)
What is the warranty for Schlage commercial mechanical locks?
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to Prod...
Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Cylindrical » D Series » Schlage | Mechanical Locks » Cylindrical » ND Series » Schlage | Mechanical Locks » Deadbolts » B Series » Schlage | Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Mechanical Locks » Mortised » L400 Series » Schlage | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Schlage | Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage
What is the Multi Point LM9300 Series?
MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks ar...
Doors and Frames » Doors » B Series » Steelcraft | Doors and Frames » Doors » H Series » Steelcraft | Doors and Frames » Doors » L-Series » Steelcraft | Doors and Frames » Doors » Paladin PW Series » Steelcraft | Doors and Frames » Frames » F & FN Series » Steelcraft | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage | Steelcraft | Von Duprin
What is the size of the L9000 spindle?
All spindles are on a "square" at 0.312" (5/16")...
Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for non...
Key Systems » Cylinder Mechanism » Schlage | Mechanical Locks » Mortised » L400 Series » Schlage | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage
What can be ordered if a no lip strike is required for the L9000?
The L-Series standard strike is the 10-072 and the available lip lengths are listed below.  7/8"  (Flat or straight lip) 1" 1 3/16" (Standard for 1 3/4" doors)  1 1/2" 1 3/4" 2" over 2"...
Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage
Is the L-Series mortise lock UL rated?
UL Listed for 3-hour fire door (except L9076 and L9077)...
Mechanical Locks » Mortised » L400 Series » Schlage | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage
What finishes are the L locks available in?
The finishes below are available on the L9000, some lever designs and trims are not available in all finishes.  605  Bright Brass  606  Satin Brass  609 &nbs...
Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the diameter of the danmark rose?
The danmark roses are all 2 1/4" in diameter....
Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage
Is the LM9000 certified for in-swing and out-swing applications?
On May 1, 2013 the LM9000 lock was discontinued and replaced with the LM9300 Multipoint Lock. The LM9000 is only certified outswing when used for tornado applications....
Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with P...
Mechanical Locks » Cylindrical » ND Series » Schlage | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage