Can a PL7 be converted to a PL8 in the field?
The function of the PL7 or PL8 cannot be changed due to the assemblies being manufactured differently....
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
How is the HL6 mortise lock lead lined?
We provide a 6" x 4 1/4" x 1/8" thick lead plate that is installed on the cover side of the lock case during installation....
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
How is the HL6, PL7 and PL8 lead lined?
Part numbers for the lead lining kits are:
HLPART.10153
HL6/PL7/PL8 LEAD LINING PKG 2
HLPART.10154
HL6/PL7/PL8 LEAD LINING PKG 3
HLPART.10155
HL6/PL7/PL8 LEAD LINING PKG 5" B...
Schlage Commercial » Mechanical Locks » Push/Pull Latches
Can the backset on the HL6 be changed?
The backset cannot be changed on the HL6-L9000 products. There are 4 different backset options available for the HL6/PL7/PL8; 2-3/8", 2-3/4", 3-3/4", and 5" backsets. If a different backse...
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Can I convert a Schlage HL6 push paddle to a pull paddle?
The push handle assembly cannot be changed to a pull assembly or vice versa on any of the HL or PL products. ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Is there a recommended mounting height range for door hardware?
Per IBC 2009:
1008.1.9.2 Hardware height:Door
handles, pulls, latches, locks and other
operating devices shall be installed
34 inches (864 mm) minimum and 48
inches (1219 mm) maximum above the
fi...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
Are security screws available for the HL6?
When ordering an HL6/PL7/PL8 product the suffix SOC can be used to specify security screws. If security screws are needed separately the part number for the security screw pack is 840613-00....
Schlage Commercial » Mechanical Locks » Push/Pull Latches