Category: Schlage

(Results from 61 to 70)
What are the part numbers for the inside and outside knobs for the L series?
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Does the door prep need to be altered when ordering the L9000 locks lead lined?
The door template L1 states: "Lead Lining: When L9000-Series or L400-Series locks are ordered with lead lining, add 1/8" to the width of the mortise cut-out on the lock case cover side of installatio...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the part number for a mortise thumbturn for rose trim?
The thumbturn for rose trim is specified by 09-509 and the Dim, see table below. Dimension Chart: 09-509 Thumbturn  Part Number     Door Range   Dim     09-509   �...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the part number for the L9000 lock solenoid?
The replacement solenoid for the Schlage L-Series mortise lock, part number L283-053, is obsolete and is no longer available. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
What power supply do I use with an L9000 electrified L lock?
Applies to L9080EL/EU, L9082EL/EU (Discontinued) The Schlage L9080 EU/EL and L9082 EU/EL require 24 VAC/VDC with a peak current of 1.3 Amps at 5 to 10 second intervals and a holding cur...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » System Components » Power Supplies » PS900 Series » Schlage Electronics
Are the danmark levers available in escutcheon trim?
The Danmark levers were available in rose trim only....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the minimum stile for Schlage locks?
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width.  See the Schlage Minimum Stile Requirements for the minimum stile for each l...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage Commercial » Schlage
What is the part number for the inside lever on an L9000 lock?
The part number is the 09-402, specify the design and finish....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Does Schlage make a mortise lock that the lever on either side retracts the latch and a key on either side retracts the deadbolt?
The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt is ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What grade of stainless steel do we use in the levers on L9000 locks?
Schlage offers 629 and 630 stainless finishes on levers for the L-Series only.  These levers are made of 303 or 304 grade stainless steel....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage