What are the electrical requirements for the Schlage L9000 lock?
Applies to L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUThe Schlage electrified L-Series wiring diagram can be found here and the requi...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What power supply is used with RX or LX switches?
The RX switch is request exit and the LX switch is latch bolt monitor switch. They do not require a power supply directly. The electrified hardware that the RX or LX switch&nb...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin | Schlage Commercial » Schlage | Schlage Commercial » Von Duprin
How does the LV9050 operate?
L9050 LV9050 (ANSI F04) Entrance/Office Lock Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is l...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
What is an XL11-446?
The XL11-446 is the L9040 privacy with thumbturns on each side.
...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
How do you order the L series lock with an ADA thumbturn?
Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design whil...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How does the L9456 function?
L9456 mortise lock is a Corridor Lock
Latchbolt retracted by knob/lever from either side.
Deadbolt thrown or retracted by key outside or inside thumbturn.
Throwing deadbolt locks outside kn...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Is the L-Series mortise lock UL rated?
UL Listed for 3-hour fire door (except L9076 and L9077)...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the part number for a L mortise lock spindle?
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1.
Spindles and Springs
Part Number
Description
L283-060
Spindle and spr...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
Can the L9070 be converted to an L9050?
Yes. The only difference between a L9050 and a L9070 is that the L9050 has a thumbturn. Simply add the standard 09-509 thumbturn for rose trim or a new 09-633 (specify trim design) inside escutc...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage