What is the XL12-728?
The XL12-728 was a special for an inside sectional indicator option for the L9071 and the L9457. This option has been discontinued and is no longer available....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Will a Schlage L9000 fit a Falcon MA door prep?
The Schlage L9000 lock will not fit in a door prepped for the Falcon MA.The mounting post holes are located 90 degrees off from each other on the Falcon MA and the Schlage L9000.On the MA series,...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the locking time on the Schlage L9000 electrified locks?
Locking Time Cycle:Immediate locking since motor driven on the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUDelayed 8-10 seconds due to pulsed signal for solenoid on the L9080...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Can a door position switch be ordered with an L series lock?
As of January 02, 2017, Schlage non-deadbolt mortise locksets can be ordered with a door position switch. To order the door position switch with an L series lockset specify DPS in the opti...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
L9000 Gen1 indicator may bind and stop operating
Improper door prep and installation is the leading cause for L9000 indicators to not work properly. Door prep and installation should be checked first before replacing any parts.
Pl...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Why does my outside lever retract the deadbolt on the electrified L9000?
The electrified L9400 locks can be used for applications such as a hospital "sleep room", bathroom or similar application where the electrified L9400 lock utilizes access control such as a card reader...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
How do I determine the handing of the 10-091 armor strike?
The handing of the 10-091 strike can be determined using the illustration below.The 10-091 is only for use with L9175 or L9176 normallyHand the strike based on the active leaf and install it on the in...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Are L9000 locks certified to UL14C?
The UL14C standard specifically
targets tin-clad doors, which are typically used in warehouses and do not use
mortise locks. To review the UL14C standard, see http://ulstandards.ul.com/standard/?...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Why does the L9000 lock with rx switch bind when I change the handing?
Schlage non-electrified L9000 mortise locks began using a modular type RX switch for locks specified with the RX on January 02, 2017. The RX is handed in that it must always be on the inside. If a loc...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage