Category: Mortised

(Results from 41 to 50)
Do we offer top cables as a separate part for the LM9200 series locks?
...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
What temperature does the L9000 fire door fuse release?
The L9000 Fire door fuse will begin to melt/release around 338 degrees Fahrenheit. ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What is M504-310 spanner wrench?
...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Schlage
Why is the L9040 and L9440 not available with HSLR trim?
The access hole for the emergency key would be a possible ligature point....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What is the P, R, and B stamped on the back of the HSLR blocking rings?
The HSLR blocking rings are marked on the back surface.  P= KILR=FSICB=SFIC...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What is the black rubber washer used for on L9000 N escutcheon trims?
The rubber washer is used for shipping only to prevent damage to the thru posts on the N escutcheon. ...
Schlage Commercial » Mechanical Locks » Mortised
What is positive latching?
A spring loaded throw on the edge of the door that engages into a strike plate on the door frame.Schlage and Falcon locks with a latch meet this requirement. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
What strike is supplied when HSLR trim is ordered for the L9000 mortise?
10-072 when deadbolt functions are ordered.10-144 (LH/RHR) or 10-145 (RH/LHR) when non deadbolt functions are ordered....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial
What finish is the cylinder provided with when a lock is ordered in 626AM?
The cylinder is ordered with a lock it will be provided in a 626 finish with no antimicrobial coating.  Rim, Mortise, Core only, and Housing only are NOT offered in AM finish. Whe...
Schlage Commercial » Mechanical Locks » Mortised
Can a Falcon mortise cylinder thumbturn be used on an MA lock?
Not recommend.  If the thumbturn is rotated and left out of position this can cause a bind between the thumb turn cam and the hub in the lock case....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Falcon

Support by product