Are the L9000 series locks UL listed?
For more iniformation visit UL certification directory here....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What colors are used on the lettering of the Falcon MA mortise lock indicator?
The letters are white in color with a green back ground for unlocked and white letters with a red back ground for locked.
This is the same color pattern for vacant (white lette...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial
Is the LM9200 series multipoint lock available with an indicator?
Mechanical LM9200 (LM9210, LM9225, LM9280) and electrified LM9200 series (LM9290, LM9291, LM9292. LM9293, LM9294 and LM9295) are not available with an indicator and a indicator cannot be used with the...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
What is the XL12-207?
The XL12-207 is a solid spring cage for the L9000 series mortise lock. This spring cage can be used to keep the lever in the fixed or rigid position. This part is only available through the ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
Can the LM9200 be installed into an aluminum door?
Not a recommended application due to the amount of material removed from the door as well as the special support brackets needed for the top and bottom latches....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial
How is the RX switch handed on the L9010?
The RX switch doesn't require handing as there is not a handing screw on the L9010 lock body. The RX switch will trigger both the outside lever and the inside lever. ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
How to determine the handing of the L9000 one-hole strikes for latching functions?
The XL11-820 & 10-145 is a one hole strike for latching functions, RH and LHR doors.
The XL11-821 & 10-144 is a one hole strike for latching functions, LH and RHR.
...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
Can the DPS switch for the L lock be added in the field?
The DPS switch for the L lock is not available as a separate component and must be order with the lock case....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Can you use ligature resistant trim on LM9200 series?
The LM9200 has not been tested with any ligature resistant trim
The LM9200 cannot be order or used with SL1 or SK1 trim. This is due to the fact the latches can create ligature points....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » LM9200