Category: Cylindrical

(Results from 71 to 80)
What is the tailpiece orientation on the Dexter C2000?
The tailpiece orientation on the Dexter C2000 is inline with the cylinder bible. Therefore, when the lever is installed (horizontally positioned), the tailpiece is horizontal, the same as the cylinder...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Dexter
How do I time the Dexter C1000 and C2000 classroom function?
To time the Dexter C1000 or Dexter C2000 classroom function, simply rotate the key cam counterclockwise until it stops before installing the cylinder and lever. ...
Schlage Commercial » Mechanical Locks » Cylindrical
Does Falcon or Schlage offer a cylindrical knob lock in the institution function?
The Falcon X series offers a X411 which is an Asylum lock. Please click here for the Falcon X series data sheet. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Falcon X series
What cylinder options are available with the Schlage A series?
The cylinder options available for the Schlage A series are:P6 - Conventional 6-pin cylinderP - Conventional 6-pin cylinder, keyed 5Z - Everest SL Conventional Cylinder, 7 pinL - Less conventional cyl...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial
Does hard wiring the Schlage L9000 or ND locks void the warranty?
As an alternative installation method, the Molex connector may be cut off and the lock installed with traditional wire splicing methods, and does not affect the warranty.  ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial
What kind of door prep is acceptable for fire door modification in the field?
The following job site preparations are acceptable for onsite modification of a fire door assembly:Holes for surface-applied hardware, fasteners, labeled viewers, function holes for mortise locksRound...
Schlage Commercial » Doors and Frames | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Is the ND Indicator handed?
The ND Indicator is handed and can be changed in the field.Click here for the Interactive and PDF Installation instructions showing the steps for handing. The lock box lid also has printed instru...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Where do I find Installation Instructions for the ND Indicator?
Click here for the Interactive and PDF Installation instructions and the Troubleshooting Guide. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Does Schlage make a convertible cylinder housing for FSIC mortise & rim?
Schlage does not make a cylinder housing that is both mortise and rim cylinder for IC or conventional. ...
Schlage Commercial » Mechanical Locks » Cylindrical
What parts come with the 40-147 Installation kit?
The installation comes with the following parts:Installation Kit for Locksets and DeadboltsKit includes JIG, Case, (2) Multi-spur bits, (4) latch/strike chisels, (2) Bushing Plates, 1" Auger bit and s...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial

Support by product