Category: D Series

(Results from 1 to 10)
What are the voltage requirements for the old Schlage D lever lock?
Electrical Requirements for EL or EU Amps .15; Volts 24 AC.  (Rectifier must be used) Amps .35; Volts 24 DC. ...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series
How do I wire both a card reader and a push button switch to an electrified lock?
For multiple switches (including some card readers) to be used with electrified locks, the switches are wired in series with the power supply. ...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised
Are Schlage and Falcon electrified locks listed to UL294?
Schlage Commercial » Mechanical Locks » Cylindrical » RU Series | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can Schlage locks be re-handed in the field?
The chassis on cylindrical locks are not handed and can be installed on a door regardless of the handing.  Mortise chassis or lock bodies are handed and can be re-handed in the field with few e...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » B Series | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series | Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Are Schlage D series knob products handed?
The D series product line does not use any parts that requires prior knowledge of the door handing.  This information pertains to the current D series knobs.  ...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series
Did the Schlage D knob spring latch and dead latch part number change?
In June of 2017: 14-001 Spring Latch was changed to the 13-248 14-019 Dead Latch was changed to the 13-247  ...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Schlage
How to time the D66 knob lock.
See attached from the D Knob Service Manual....
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » D Series
Are the Schlage "D" Series knobs offered in a 622 finish?
The "D" series knobs are not offered standard in a 622 finish. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical » D Series
Are Schlage or Falcon electrified locks listed to UL1034?
Schlage and Falcon electrified cylindrical and mortise locks are not listed to UL1034....
Schlage Commercial » Mechanical Locks » Cylindrical » RU Series | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What is the part number for the Anti-friction fire door latch?
The 14-042 is used with ND, and D series locks....
Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series