How many complete ALX Locks are in a Shipper Carton?
The fully configured ALX products ship 6 to a Shipper Carton. This is for all functions. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Is the ND25 Exit Lock function available in a split finish?
Split finish is not available with a complete lock. You can specify the ND25 Exit lock with the desired inside finish, and then order the (blank outside rose) part number N523-002 as a separate ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial
Will the old plunger bar for the ND50 work with the new push button?
The plunger bars for the ND50 and the ND53 were slightly modified in the 2017 redesign. The new buttons will not fit on the old plunger bars. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial
What is the tailpiece orientation on the Dexter C2000?
The tailpiece orientation on the Dexter C2000 is inline with the cylinder bible. Therefore, when the lever is installed (horizontally positioned), the tailpiece is horizontal, the same as the cylinder...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Dexter
What cylinder options are available with the Schlage A series?
The cylinder options available for the Schlage A series are:P6 - Conventional 6-pin cylinderP - Conventional 6-pin cylinder, keyed 5Z - Everest SL Conventional Cylinder, 7 pinL - Less conventional cyl...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial
Does hard wiring the Schlage L9000 or ND locks void the warranty?
As an alternative installation method, the Molex connector may be cut off and the lock installed with traditional wire splicing methods, and does not affect the warranty. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial
What kind of door prep is acceptable for fire door modification in the field?
The following job site preparations are acceptable for onsite modification of a fire door assembly:Holes for surface-applied hardware, fasteners, labeled viewers, function holes for mortise locksRound...
Schlage Commercial » Doors and Frames | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series