Category: Push & Pull Plates

(Results from 1 to 10)
When do you need to use the Fire Rated 8402 kickplate instead of the 8400?
If the top of the plate is 16 inches or less above the bottom of the door, the plate is not required to be labeled.  Field installed plates larger than that must be labeled.  The other opt...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Ives
How to order pulls for back-to-back application
In order to get both the inside and outside pulls on a single line item, specify with a PR ("pair") prefix, and the appropriate suffix for back-to-back mounting option (J, N, or P) based on the pull...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives
What size security bit would be used with the X Mount option?
The X Mount security mounting option for Ives pulls is a "pin in star" design that is 5/16" diameter with an 1/8" pin in the middle....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Ives
Does Ives sell hands free pulls or foot pulls?
Hands free pulls are available and shown in this data sheet....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Can an 8103 EZHD be mounted to an 8300 pull plate?
Yes, the pull and the plate should be  ordered on separate line items.....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates
What does "CFL" stands for when someone is ordering a 7305 CFL edge guard?
CFL is not an acronym Allegion acknowledges when it comes to Ives product.  A possibility is "cut for lock". If a customer has used this term,  ask for clarification or drawing/sketch ...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates
How thick is the 8400 plastic kick plate?
The thickness is 1/8" (.125")...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates
Can you notch an 8402 UL Kick plate?
No, the 8402 UL Fire Rated kick plate cannot be notched or prepped for any hardware.  ...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates
What is the diameter of the O-mount Ives fastener?
The diameter of the O-mount fastener is 1.25"...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Ives
Can a standard mount 8305 with back plate be converted to a flush mount?
Concealed mounting not an option on the 8305....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates

Support by product