When do you need to use the Fire Rated 8402 kickplate instead of the 8400?
If the top of the plate is 16 inches or less above the bottom of the door, the plate is not required to be labeled. Field installed plates larger than that must be labeled. The other opt...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Ives
What size coordinator do I need ?
A door coordinator needs to be the full size of the active leaf and must overlap the inactive leaf by 6" minimumIt is preferred for a coordinator to overlap the inactive leaf by at least half of the s...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Can a Bar Coordinator be used with Offset Pivots?
There is a small chance that this combination could work, but it often does not work properly.
Because of the location of the pivot point, the active door lever of a Bar Coordinator (COR32, COR4...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators » Ives | Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the strike for the FB457/FB458 available as an item to purchase?
The strike is only available with the FB457 / FB458 purchased complete. It is not available as an individual item....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators » Ives | Schlage Commercial » Ives
Why is it so hard to get the flush bolt tip off?
Many of our flush bolts have rod & tip service items because the tip shouldn't be removed. The factory uses red Loctite when assembling the rods and bolt tips which will cause difficulty whe...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Should I use Dummy trim on an Inactive door using Automatic Flush Bolts?
On a door with automatic flush bolts, the inactive leaf can’t have a dummy lever, push bar, or other hardware that would make it appear that the Inactive leaf could be operated for egress. N...
Schlage Commercial » Exit Devices | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised
What coordinator is model 33S1?
33S1 is not a model number.
33S1 is the UL Listing for Ives (and formerly Glynn-Johnson) Bar Coordinators (COR32, COR42, COR52, COR60, and COR72) and on the Gravity Coordinators (COR7...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Cabinet Knobs & Pulls » Ives | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
How does a FB61 flushbolt work?
FB61P How It Works
Top Bolt
To open the door, manually push down on the release trigger on the faceplate to pull the top bolt down. Open the door. Spring action allows top ...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators » Ives
Can the extension rods for FB457 & FB458 be used on FB30/50 extension rods
Both the FB457/FB458 and FB30/50 flush bolts use 1/4-20 threaded rods. Although the rods supplied for the FB30/50 are not all thread, the extension roads will work for either flush bolt. N...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators » Ives | Schlage Commercial » Ives