Category: Ives

(Results from 1 to 10)
What products are available with an antimicrobial finish?
DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, blo...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Ives
Are Ives pulls ADA compliant?
8103EZ and 9103EZ have 2 1/2" clearance the other pulls have 1-1/2" clearance. Check with your local code for clearance required....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
What templates do you use for a 98/99 Rim/Vertical Rod device with VR910/VR914 trim?
When ordering a Von Duprin 98/99 Series Exit Device for use withe Ives VR910 or VR914 pulls, use the Exit Only (EO) trim function designation (ex. 98EO, 9927EO, etc.) Use the NL template for the...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is the 8402 kick plate A or B label?
The 8402 kick plate is "A" label for metal doors and "B" for wood doors....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is there a vandal resistant trim like the VR910 for the 33A/35A series?
We don't offer vandal resistance trim for the 33A/35A series exit device....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is the back to back glass mounting available on the 8102/8103/8103EZ/8190 pull?
Back to back glass mounting is available on the 8103/8103EZ/8190 pull.  The glass version has a shorter screw and also either felt or rubber bumper....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is the HL6 ADA compliant?
The HL6, PL7, PL8 meet ADA guidelines.ADA compliant letter...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives
Can you change from standard mounting packs to type O mounting packs on the Ives 8190 pulls?
Yes, both mounting types the handle is mached the same with a 1/4-20 threaded hole...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Does any of the Ives VR trims work with non-IR exit devices?
You will need to check with the other manufacturer.  Check the template for the other manufacturer to see if the hole pattern for the trim and the cylinder location would match up.  The VR trim cou...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
What gauge stainless steel is used on Ives 8400 kickplates?
The 8400 stainless steel kickplates are 18 gauge....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives

Support by product