Category: Hinges & Pivots

(Results from 31 to 36)
Could an Ives 700 series hinge, be mounted like a half-surface hinge where one leaf is on the outside surface of the frame, 90 degrees from the door leaf, if there is room for the door leaf to fit?
No, it does not contain the correct hardware and the angle on the leaf's are not meant for that type of installation.We can only recommend standard full mortise installation...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Can but hinges be ordered in custom sizes?
Butt hinges can be ordered in custom sizes as a special order, but only in large quantities. ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Does Ives offer spring-loaded continuous hinges?
Ives does not offer spring-loaded continuous hinge.  The only spring-loaded hinge offered is the 3SP1 butt hinge....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Is there a SOSS closing hinge that will work with the 518 series?
There is not a invisible closer hinge (IC) that will work with the 518 series of invisible hinges....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Can SOSS invisible hinges work with bi-fold doors?
SOSS hinges can be used with in-swing and out-swing bi-fold doors.  For bi-fold doors, SOSS hinges must be oriented in one direction at the frame and in the opposing direction at the joint of the...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Can a SOSS model 216 invisible hinge and model 218 invisible hinge be used in the same door?
The SOSS model 216 invisible hinge cannot be used with the model 218 invisible hinge. The pivot point on these hinges are different....
Schlage Commercial » Automatic Operators | Schlage Commercial » Mechanical Accessories » Hinges & Pivots

Support by product