Category: Hinges & Pivots

(Results from 21 to 30)
Does a 7230 SET come with intermediate pivots?
A pivot SET is defined in the catalog as being a TOP pivot and a BOTtom pivot.The number of INTermediate pivots used in a given application vary depending on the door height and weight, so they are no...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Is the 5BB1 swing clear hinge handed?
It is not handed.  ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Why does the instructions suggest calling Tech Support for installing geared continuous hinges on lead lined doors?
All Tech support will suggest is not to use the lead lining as an anchor for the mounting screws for the hinge.  The mounting screws should avoid the lead lining in the door.  ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Can the 3SP1 open to 180°?
The 3SP1 can open to 180°, but as the hinge opens, the tension on the spring will increase making it harder to open that much. ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Are the security screws (SEC/HM) for Ives continuous hinges self-tapping and self-drilling?
The security screws for Ives continuous hinges are machine screws.  They are not self-tapping and self-drilling....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
What is the thread for the 7226 bottom bearing pin?
The thread is a ¾-16 UNF-2A thread. ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
What is height of Ives 7230F bottom pivot base?
The plate portion of the 7230F Bottom Base is 1/4" tall...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
What does the "RP" and "F" prefix refer to when ordering Ives residential hinges?
RP represents the fact that the present residential hinges have "Removeable Pins"....they used to have Non-Rising Pins that were hard to remove.....the F just means they are made of steel...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Do the Ives XY hinges open to 180°?
Yes, the XY series hinges open to 180°...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots
Will 4ea intermediate pivots (not butt hinges) with the 7226 on top and no bottom pivot on floor, hold up 225lb door?
Intermediate pivots are to align the door only, because the foot print of the pivot is too small for weight bearing. Go with butt hinges instead. ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots

Support by product