Category: Flush Bolts and Coordinators

(Results from 11 to 20)
Does the Ives mounting bracket that is used in conjunction with a bar coordinator (such as MB1F, MB2F, or MB3F) carry a fire rating?
No, the steel mounting bracket does not have its own fire listing. Mounting brackets allow for the mounting of hardware that normally mounts to the frame but cannot do so due to the presenc...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators » Ives | Schlage Commercial » Mechanical Accessories » Stops, Bumpers & Silencers » Ives
What is the difference between a COR9G and a COR7G gravity coordinator.
The 7G has a 7' arm. The 9G has a 9" arm.Reference the Ives Catalog for information on when to use the different sizes....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Is the FB51 automatic bottom bolt is the same automatic bottom bolt used in the FB31?
They are the same item....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
What replaced the Ives FB6 flush bolt?
The FB6 was replaced by the FB458....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Is there a parts manual for the Ives flush bolts?
As the flush bolts are sold as a unit and there are no internal parts available for sale, there is no parts breakdown. ...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Does Ives still offer the 260 flush bolt?
Ives no longer offers the 260 flush bolt....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
What is the minimum stop width required for an Ives bar coordinator?
Ives bar coordinators require a minimum stop width of 1-5/8"....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Is it ok for someone to use a COR42 on a pair of equal 36" wide doors, even though the catalog says to go with the COR52?
The Ives Catalog has a chart referencing what Opening Width range each size coordinator could be used on and common applications of equal pairs of doors.To determine the size COR you need;Start with t...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Is the FB61T UL listed for fire doors?
The FB61T, by itself, is not UL listed for fire doors.  It must be used as part of a pair (FB61P) or used with an auxiliary fire latch (FB62) in order to maintain its fire rating....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators
Can the Ives FB31T be used on beveled edge doors?
Yes, the FB31T can be used on beveled edge doors....
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators

Support by product