Why is my QEL device not retracting when powered.
Check the condition of the LED on the motor.The Von Duprin QEL motor has a couple features that protect the motor.If the LED is alternating between Green and Red;There is a Tamper Resistance feature t...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?
The Trim/Device Cable part number is 040193.
If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no ad...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Why does the 996L not fit with my 98/9947 device?
The 994/996 lever trims have bulkier parts than the obsolete 992 lever trim. When the 994/996 lever trims were introduced, the bottom rod for the 98/9947 was modified with a 3/8" offset to allow...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Can anti-microbial coating be added to powder coated Von Duprin exit devices?
Anti-microbial coating on top of powder coat finishes such as 313, 315, and SP28 has not been successfully tested and is not offered....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
Will the PS914 power supply work with QEL devices?
Yes, the PS914 (with option board) is compatible with QEL devices. It will not "fry" the QEL device. The power supply will only put out the amperage that the load (motor) calls for. &...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies | Schlage Commercial » Power Supplies » Standard | Schlage Commercial » Power Supplies » Standard » PS900 Series | Schlage Commercial » Von Duprin
What do I get with the various Von Duprin Insulclad kits?
33/3547 INS-2
One longer ratchet release finger
Two longer fingers to connect the center case to the vertical rods
33/3547 INS-4
One longer ratchet release finger
Two longer fin...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
How many rod guards do I need to order per exit device?
Order 2 rod guards per device if you want to cover the top and bottom rod. The rod guard (RGO) is furnished in a 36" length. For doors taller than 7', order additional rod guards....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 55 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
How does an ALK work?
In summary, the operation of an ALK is:
The
exit device RX or LX switch will trigger the alarm.
To reset an alarm
that is sounding, the 3 options are:
Rotate the Keyswi...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
What trim can be used with a 9947 device with the INS-2 kit?
A 98/9947 device with the INS-2 option (or a kit 051841-00 added later) used on doors with a 1/2" thick applied panel on the push side of the door will not allow use of a functional 996L/L-B/K/K-BE tr...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin