Category: 24 Series

(Results from 1 to 10)
If they need the alarm kit for the 17 or 18 series what can they do?
The older version of the circuit board for the exit alarm(EA) kit was discontinued in June 2012 and no longer available.  You will need to replace the device with the 24 or 25 series with EA...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series
What power supply is need for Falcon EL devices?
The Von Duprin PS914 power supply with either the 900-2RS  or the 900-4RL option board is required....
Schlage Commercial » Exit Devices » Touch Bar » 1490 Series | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Is there an insulclad kit for use with the Falcon 24-C device?
There is not a kit for insulclad applications for the Falcon 24C.  When ordering the device, specify the applied panel and door thickness to get the appropriate hardware. See notes below. This is...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series
What products are available with Molex connectors?
Data Sheet - Overview and How to Order (Updated 11/2014 to include Falcon MA and T locks)FAQ - Various Q/ATechnical Manual - Wire color, Pin configuration, Service instructions ...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series
The optional auto reset is no longer available as an option on the Falcon exit alarm.
Effective August 4, 2014, the optional auto reset is no longer available as an option on the Falcon exit alarm.Falcon strives to provide a solid product, with solid performance, at a solid price. In a...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series
Can the 24-R be used with the Von Duprin 6111 electric strike?
The 24-R can be used with the Von Duprin 6111 electric strike.   The 6111 has the same projection as the 299 strike and the Von Duprin 4854 electrified mullion has the same dimensions a...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » System Components » Electric Strikes » 6000 Series | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin | Schlage Commercial » Von Duprin
What template should I use for the Falcon 718 C escutcheon trim, less pull, when used with the Falcon 24 C exit device?
What template should I use for the Falcon 718 C escutcheon trim, less pull, when used with the Falcon 24 C exit device?  Template number T-2362 Revision A would be correct (metal doors). &nb...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series
EL Device Troubleshooting Guide
VISIT US.ALLEGION.COM/EL-SUPPORT FOR TROUBLESHOOTING VIDEO, DOWNLOADABLE GUIDE, AND INSTALLATION INSTRUCTIONS(For best viewing, use Chrome or Firefox browser.)ALLEGION EL SOLENOID ELECTRIC L...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed | Schlage Commercial » Exit Devices » Recessed » 2390 Series | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin | Schlage Commercial
Can I add hex dogging to a QEL device?
To add hex dogging to a QEL device, the complete motor assembly must be replaced.  If you have a current motor design, replace it with a HD-QEL motor kit (#958002).  If you have an older mot...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Did the Falcon Surface Vertical Rod Latch Covers change in 2019?
In late July 2019, the Latch Cover for Falcon 19-V, 24-V, and 25-V Series Surface Vertical Rod Devices changed to a wider footprint to match the shape of Von Duprin 98/9927 and 2227 Latch Covers. &n...
Schlage Commercial » Exit Devices » Cross Bar » XX Series | Schlage Commercial » Exit Devices » Touch Bar » 19 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Falcon