What is the frequency for the receiver in the 8310-2210 Kit?
The 8310-2210 wireless touchless actuator kit uses a 915Mhz receiver.LCN only offers a 915Mhz transmitter built into the 8310-2210 kit....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Can you extend the antenna on the 865 receiver?
You can extend the antenna on the 865 receiver up to 3 times, in increments of 6 ¾”. 18-22AWG works best....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Does the 8310-2320 come with gasketing?
The 8310-2300 series wave activation device does come with the weather resistant gasketing that the instructions say to use...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
How many transmitters are needed to make the 8310-855 actuator wireless?
The 8310-855 double vestibule actuator requires two transmitters. One for each switch. You can use the 8310-844 or the 8310-844J transmitters.You will also need 2-8310-865 receivers...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
Can the LCN 6440XP be used with safety sensors?
The 6440XP cannot be used with any type of safety sensors. This includes the LZR, 8310-804 and 8310-877....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Does the LCN 8310-859 remote work on the 8310-804 DMSS sensors?
The 8310-859 remote is not needed and will not work on the 8310-804 DMSS sensors. The 8310-804 sensors have manual adjustments only.For the 8310-804 instructions see here....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series