Category: L9000 Series

(Results from 31 to 40)
Is the St. Annes lever still available?
In an effort to reduce confusion associated with similar-looking lever designs, please be advised that the St. Annes lever for the Schlage L-series mortise lock, LT-series tubular lock, and Von Duprin...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
What application does the L9094 serve?
The L9094 was designed for retrofitting into an existing door prep that also has an inside cylinder.  ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the XL12-728?
The XL12-728 was a special for an inside sectional indicator option for the L9071 and the L9457. This option has been discontinued and is no longer available....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Will a Schlage L9000 fit a Falcon MA door prep?
The Schlage L9000 lock will not fit in a door prepped for the Falcon MA.The mounting post holes are located 90 degrees off from each other on the Falcon MA and the Schlage L9000.On the MA series,...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
When unlocked why does the outside lever not retract the latch on the L9090, L9091, L9092, L9093, L9094, L9095 installed with RX,
When the RX switch on a L9090, L9091, L9092, L9093, L9094, L9095 is handed incorrectly it can cause the outside lever to rotate in the upward motion, but stayed in the locked position when trying to r...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Has the L283-031 mounting plate changed?
The L283-031 was modified to have cut outs on both sides for use in both the L9000 and LT locks.  Please see here for an image of the modified mounting plate. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
What is the locking time on the Schlage L9000 electrified locks?
Locking Time Cycle:Immediate locking since motor driven on the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUDelayed 8-10 seconds due to pulsed signal for solenoid on the L9080...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Is there a mounting template for the L-series Gen1 indicators?
...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Schlage
Are Schlage and Falcon electrified locks listed to UL294?
Schlage Commercial » Mechanical Locks » Cylindrical » RU Series | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can a door position switch be ordered with an L series lock?
As of January 02,  2017, Schlage non-deadbolt mortise locksets can be ordered with a door position switch.  To order the door position switch with an L series lockset specify DPS in the opti...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage